← Back to Independent & passion
Independent & passion

Deadmau5 Helmet (2017)

Deadmau5 Helmet (2017)

This was a project I have been wanting to make for quite some time. The opportunity came up when one of my close friends birthday was coming up and he was a very big Deadmau5 fan since the day I met him. I got a group of friends on board and started building!

My goal was to use high quality parts and create a clean, smooth finish. We decided on a black and white helmet so the lights will look good with any colour combination.

We purchased acrylic lighting fixtures for the eyes and head of the helmet. These were custom ordered from a lighting distributor.

After drawing the measurements onto the acrylic globe, I started cutting with my diamond cutting wheel on my Dremel. I had to make sure I cut at a slow and steady pace so I did not crack the edges or melt too much of the edge.

After I successfully cut the mouth and neck entrance, the top of the globe was very fragile and had to be reinforced. Fiberglass was my solution.

After cutting the mouth and neck, I painted the interior of the head. After that dried, I applied fiberglass cloth and fiberglass resin to the inside of the helmet to add strength.

I used the template to trace the shape onto a special insulation board. This insulation has a foam core with a fiberglass coating on the outside for strength. This was provided to me by one of my friends. These pieces were cut using my scroll saw.

I cut down the steel rods to 12 inches each with a metal grinder. 2 of these rods will be in each ear and will prevent them from spinning from a single axis.

I carved groves into the foam with a Dremel and gave space for the threaded rods to fit inside. These halves will be sandwiched together.

Both ear halves glued together. I used a combination of high temperature hot glue and PL Premium to glue both sections together. I used clamps all around the ears and let each ear set for 24 hours.

Since the lip had to be 1/2 inch thick, I used insulation board in the same thickness and decided to glue it to the inside. To get the proper curve without breaking the board, I cut groves into the piece using my scroll saw.

I used Bondo body filler to fill the gaps of the lip. This way, it can be sanded smoothly.

Bondo was applied to one side of the ear. I applied Bondo in thin layers to minimalize the amount of sanding that would be required later.

Black primer was applied to the outside of the helmet. This would be known as the base colour coat.

I drilled mounting holes on the top of the helmet for the screws to fit through. The ears fit pretty nicely!

I put the helmet on to test the sitting of the hardhat and see the distance of the helmet from the shoulders. Looks pretty good so far.

After attempting to paint a metallic coat on top of the primer, I kept getting an undesired effect called "orange peeling" on the paint, so I had to go back to the beginning and start over with the paint coats. This was the base, filling primer.

After getting back to the shiny black paint, I wet sanded the helmet with 2000 grit sand paper and applied car polish to the helmet. I only did this to the head part and you can see the difference between that and the ears.

I made a disc using EVA foam and glued aluminum foil to the top of it. After that, I cut some holes using an Exacto knife. This will allow the lights to reflect off the base a lot better.

Final touches finished. I just had to clean up the electronics on the inside.

The mesh of the helmet was a mesh food cover, cut and painted white. I put a white fabric behind and used another mesh piece to clamp the fabric to the other side.

Thank you for following my build of the Deadmau5 helmet!

If you have any questions about anything I discussed, please contact me through email.

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet

Deadmau5 helmet